The HYTORC Washer™
Guaranteed to correct even the most difficult bolting applications
Let TORCGUN prove this system to you and if the job is not done faster, safer and 100% Leak-FREE – it is FREE of charge.
The HYTORC Washer™ Series is our most cost effective way to remove the need for an external reaction arm when using a torque tool. When a HYTORC Washer™ is placed under a standard nut, torque can be applied without damaging or marring adjacent nuts, flanges or the tool.
The unique configuration of the HYTORC Washer™ turns the standard nut into a high accuracy device by removing uncontrolled flange friction and nut side loading. The HYTORC Washer™ provides the operator with a completely hands free and reaction free nut tightening operation.
BENEFITS:
- Reaction Point Free Torque Application
- Backup Wrench Free Torque Application
- Side Load Free Torque Application
- High Load Accuracy
- Hand Free Operation
FEATURES:
- Operates with Standard Hex Nut
- Hard Finished Nut Seating Surface
- Notched Hex Corners for Inverted Operation
The HYTORC Washer™ functions like a simple washer placed under a conventional hex nut. Each HYTORC Washer™ has a threaded insert pressed into the bottom of the body. The HYTORC Washer™ is installed on a bolted application just before the hex nut. Using a special socket the HYTORC Washer™ body is utilized as a reaction point for applying torque to the hex nut. As the stud stretches during tightening the threaded insert travels upward and creates twisting resistance on the stud threads which eliminates the need for a backup wrench.
The HYTORC Washer™: Fast . Safe . Simple . Accurate
 |
|
||
The HYTORC Washer™ installed on bolt |
Standard nut on The HYTORC Washer™ |
During stretching of the bolt,the thread segment of the HYTORC Washer™ creates a counter nut effect and prevents the bolt from turning |
Finished application |
The Torque Gun Company
